The Mollusk

€21.00
net of any taxes

Each board adds 16 PWM outputs to a KL25Z under Pinscape Firmware

Quantity
Out-of-Stock


Here is the new evolution of my expansion cards!

This card is an expansion card that allows you to add PWM ports to a KL25Z under Pinscape.

It uses 5 outputs (including a pwm) as well as the 5v and GND of a kl25z. 

Each MOLLUSK card adds 16 PWM ports, and they can be plugged in one after the other to add more PWM ports.

It is designed to receive "power" cards which will manage the power. 

From there, you will have 16 additional (modular) pwm outputs, each with opto-electronic protection to properly separate the kl from the toy power supplies, to which you will connect your power boards.

You can connect several MOLLUSK one after the other without consuming new outputs on your kl25z. 

To put it simply, for the price of 5 outputs on the kl25z, you can add as many PWM outputs as you want! (nevertheless, I recommend not to exceed 192 outputs because the signal can deteriorate if it crosses too many cards ...) 

The system consists of a card that is connected to the kl using the sockets, the cables are not supplied, we also connect a + 12v from the toys power supply, as well as a GND from of feeding toys. 

No more limit to the sensations on your pincab! 

Documentation available in the Laboratory

IN NO EVENT IT WILL BE USED ALONE AND YOU WILL NEVER PLUG IN TOYS DIRECTLY ABOVE !!!

MOLLUSK_v1

You might also like

chat Comments (0)