TeenCab
€13.33
A Teensy 3.1/3.2/4.0 shield
Shield to properly connect a TEENSY 3.1, 3.2 or 4.0 in a pincab in order to manage the addressable leds, or for any other case.
A test button to test your leds and their color order.
Do not connect +5V on TEENCAB for a virtual pinball use !
Here is my solution to use your TEENSY in your Pincab. It has a test button that launches an RGBCMYW color sequence in order to properly configure your LEDs, so you will not have the flash each time the Pincab is started.
8 sockets to connect the 8 signal lines, one socket to connect the 5V power supply to the card.
The TEENSY is clipped onto the board using Dupont connectors.
TEENSY NOT PROVIDED !
WARNING !!! Never connect the LEDs if they are not supplied by their power supply.
The TEENSY must have the pins welded down !
Instructions available HERE
You might also like
Comments (0)