A Wemos shield for addressable leds.
Shield to cleanly plug a WEMOS into a pincab to manage addressable leds.
6 microswitches allow you to choose to activate the 220 Ohms resistor on the LED line if you need it, or not.
6 small terminal blocks to connect the signal lines, a small double terminal block to connect the masses.
WEMOS is clipped onto the card using Dupont connectors.
The Wemos must have the pins welded down!
output 1 / D5, output 2 / D6, output 3 / D7, output 4 / D8, output 5 / D0, output 6 / D1
Delivered with its 4 TPU PCB feet.
I provide here a hardware solution despite the flash of the Wemos, I can not help you configure your machine.
By using a WEMOS, you will have to spend a little time configuring DOF, and you get out of the DOF official version.
Please refer to the different tutorials / forums and Facebook groups for this.
You might also like