USB KILLA v2

USB KILLA allows you to turn off the power of your USB devices when your PC is turned off.

V2: Addition of 5V and 12V socket and addition of 2 LEDs to check the voltages.

Connect the card between your USB devices (or your USB HUB) and your PC, so when your PC turns on it will power your cards (KL25Z, Wemos, ....), and when it goes out it will cut them, in order to protect them.

The input is via a Mini USB B cable (not supplied) and at the output is connected a USB type A cable (not supplied either). It is connected to the PC power supply via a MOLEX socket, or via the Terminal Blocks, and two small LEDs light up to check if the 12V and 5V are there.

You can use the sockets to transplant the 5V, 12V and GND of the PC power supply.

This card works perfectly to cut for example also the USB power supply of 3D printers and other type of material

This card only supports USB type 1 and 2 !