{"id":954,"date":"2021-06-11T13:13:31","date_gmt":"2021-06-11T11:13:31","guid":{"rendered":"https:\/\/shop.arnoz.com\/laboratoire\/?p=954"},"modified":"2021-06-11T13:13:34","modified_gmt":"2021-06-11T11:13:34","slug":"user-manual-the-mollusk","status":"publish","type":"post","link":"https:\/\/shop.arnoz.com\/laboratoire\/2021\/06\/11\/user-manual-the-mollusk\/","title":{"rendered":"User manual The MOLLUSK"},"content":{"rendered":"\n

CREDITS AND ACKNOWLEDGMENTS<\/h2>\n\n\n\n
\"\"<\/figure>\n\n\n\n

Writing + creation: Arnoz<\/a><\/p>\n\n\n\n

Based on the work of MJR: http:\/\/mjrnet.org\/pinscape\/<\/a><\/p>\n\n\n\n

Please do not copy or publish this document without the prior permission of the author.<\/p>\n\n\n\n

PRESENTATION OF THE CARD:<\/h2>\n\n\n\n

          a \u2013 The MOLLUSK<\/h4>\n\n\n\n
\"\"<\/figure>\n\n\n\n

This card is an expansion card that allows you to add PWM ports to a KL25Z under Pinscape.
It is designed to receive \u00ab\u00a0daughter\u00a0\u00bb cards which will manage the power. the cards can be chained to multiply the number of outputs available.<\/p>\n\n\n\n

IMPORTANT: We will NEVER connect toys directly from MOLLUSK, we must always go through daughter cards, at the risk of farting everything !!!<\/strong><\/span><\/strong><\/p><\/blockquote><\/figure>\n\n\n\n

It uses 4 digital outputs and 1 PWM output, as well as a 5V and a common ground for the KL25Z.<\/p>\n\n\n\n

It allows you to add 16 PWM outputs to the KL25Z, and the cards can be connected one after the other to add as many PWM outputs as you want, using only the 5 cables on the KL25Z.<\/p>\n\n\n\n

Each output passes through an optocoupler to properly separate the electrical control and power signals.<\/p>\n\n\n\n

Daughter cards such as MOS4 or MOS’LIGHT will be connected to the 16 available outputs, which will be responsible for managing the power and thus controlling your toys.<\/p>\n\n\n\n

As the card is controlled using 7 signal wires, it is interesting to note that the expansion card can be moved away from the KL25Z to the other end of the Pincab with its dedicated power supply. thanks to only 7 small cables, and thus reduce the power cable lengths and group it all together wherever you want, and even in several strategic places in your Pincab, because it is the same for the link between 2 expansion cards.<\/p>\n\n\n\n

It has 16 in-line outputs (2 * 8) on socket numbered from 1 to 16.<\/p>\n\n\n\n

I advise you to watch this video presentation to clarify all that\u2026.<\/p>\n\n\n\n

\n