PinMos + Wemos
A Wemos shield for addressable leds.
The Wemos card is provided.
Supplied with WEMOS d1 mini pro programmed.
Shield to cleanly plug a WEMOS into a pincab to manage addressable leds.
6 microswitches allow you to choose to activate the 220 Ohms resistor on the LED line if you need it, or not.
6 small terminal blocks to connect the signal lines, a small double terminal block to connect grounds.
WEMOS is clipped onto the card using Dupont connectors.
6 outputs for 6 different functions (backboard, side, undercab, ring ....).
Wemos is provided flashed with Version 1.02 via ARDUINO V 1.8.3, FASTLED V 3.1.6, ElapsedMillis V 1.0.4
output 1 / D5, output 2 / D6, output 3 / D7, output 4 / D8, output 5 / D1, output 6 / D4
I provide here a hardware solution despite the flash of the Wemos, I can not help you configure your machine.
By using a WEMOS, you will have to spend a little time configuring DOF, and you get out of the DOF official version .
Please refer to the different tutorials / forums and Facebook groups for this.
You might also like